Victron Energy SmartSolar MPPT 250/100-Tr VE.Can

€ 269.99 · 4.9 (202) · In Magazzino

Save more when you DIY. Call our sales techs for a free quote on how to install your own wind and solar power.
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. MPPT: Ultra Fast Maximum Power Point TrackingThe MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model. The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others. Control Your Charger RemotelyThe MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data. Daisy Chain Additional UnitsThe VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device. Remote Monitoring and ControlIf the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520. SmartSolar Control DisplayThe VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device. SmartSolar Charge Controller with VE.Can interface 250/100 Battery voltage 12/24/48 V Auto Select (36 V: manual) Rated charge current 100 A Nominal PV power, 12 V 1a,b) 1450 W Nominal PV power, 24 V 1a,b) 2900 W Nominal PV power, 36 V 1a,b) 4350 W Nominal PV power, 48 V 1a,b) 5800 W Max. PV short circuit current 2) 70 A (max 30 A per MC4 conn.) Maximum PV open circuit voltage 250 V absolute maximum coldest conditions 245 V start-up and operating maximum Maximum efficiency 99 % Self-consumption Less than 35 mA @ 12 V / 20 mA @ 48 V Charge voltage 'absorption' Default setting: 14,4 / 28,8 / 43,2 / 57,6 V (adjustable with: rotary switch, display, VE.Direct or Bluetooth) Charge voltage 'float' Default setting: 13,8 / 27,6 / 41,4 / 55,2 V (adjustable: rotary switch, display, VE.Direct or Bluetooth) Charge voltage 'equalization' Default setting: 16,2 V / 32,4 V / 48,6 V / 64,8 V (adjustable) Charge algorithm multi-stage adaptive (eight pre-programmed algorithms) or user defined algorithm Temperature compensation -16 mV / -32 mV / -64 mV / °C Protection PV reverse polarity / Output short circuit / Over temperature Operating temperature -30 to +60 °C (full rated output up to 40 °C) Humidity 95 %, non-condensing Maximum altitude 5000 m (full rated output up to 2000 m) Environmental condition Indoor, unconditioned Pollution degree PD3 Data communication VE.Can, VE.Direct and Bluetooth Data communication Yes (2 pole connector) Programmable relay DPST AC rating: 240 VAC / 4 A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC Parallel operation Yes, parallel synchronised operation with VE.Can (max. 25 units) or Bluetooth (max. 10 units) ENCLOSURE Color Blue (RAL 5012) PV terminals 3) 35 mm² / AWG2 (Tr models) Three pairs of MC4 connectors (MC4 models) Battery terminals 35mm² / AWG2 Protection category IP43 (electronic components), IP22 (connection area) Weight 4.5 kg Dimensions (h x w x d) in mm Tr models: 216 x 295 x 103 MC4 models: 246 x 295 x 103 STANDARDS Safety EN/IEC 62109-1, UL 1741, CSA C22.2 STORED TRENDS Data stored Battery voltage, current and temperature, as well as load output current, PV voltage and PV current. Number of days trends data is stored 46 1a) If more PV power is connected, the controller will limit input power. 1b) The PV voltage must exceed Vbat + 5 V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1 V. 2) A PV array with a higher short circuit current may damage the controller. 3) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels Maximum current per MC4 connector: 3…

Victron Energy SmartSolar MPPT 150/100-Tr VE.Can (SCC115110411)

Solar charge controller The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy

Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller - Solarmart Photovoltaic Solutions

Victron 250/85 MPPT unboxing

Victron Energy BlueSolar MPPT 250/100-Tr VE.Can SCC125110441

Victron SmartSolar MPPT 250/100-Tr VE.Can (SCC125110412), Solar charge controller, Victron SmartSolar MPPT 250/100-Tr VE.Can solar charger gathers

Victron SmartSolar MPPT 250/100-Tr VE.Can (SCC125110412) - BLUETOOTH

Victron Energy SmartSolar MPPT Charge Controller 250V- e RV

Victron Energy SmartSolar MPPT Tr VE.Can 250V 100 amp, 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from

Victron Energy SmartSolar MPPT Tr VE.Can 250V 100 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

Victron Energy SmartSolar MPPT 100|50. A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.